Hello everyone,
I am developing an HMI application. In this application, I have a handful of multistate pushbuttons that control various pieces of equipment. Most of them are a Hand-Off-Auto setup. What I am wondering is if there is a way to set these up so that if they are in a running state (hand or auto) and they are pressed, can they return to the off state. For example, I may want to run a conveyor in hand and then shut it off rather than go from Off to Hand to Auto and then back to Off. Instead it would go Hand to Off, Auto to Off...etc. Any ideas would be greatly appreciated.
Thank you
I am developing an HMI application. In this application, I have a handful of multistate pushbuttons that control various pieces of equipment. Most of them are a Hand-Off-Auto setup. What I am wondering is if there is a way to set these up so that if they are in a running state (hand or auto) and they are pressed, can they return to the off state. For example, I may want to run a conveyor in hand and then shut it off rather than go from Off to Hand to Auto and then back to Off. Instead it would go Hand to Off, Auto to Off...etc. Any ideas would be greatly appreciated.
Thank you