Guys, I just updated my software from rev 9 to rev 10 on FactoryTalk View Studio ME, and after opening an application (on Rev 10), if I want to send a string to the PLC (CompacLogix L24R, Rev 24.x), the PLC gets the String Plus "0$", how can I remove the unwanted characters.
With the old rev (9.x) of Studio I did not get the last characters.
I tried: on the "String Input Enable"
*- on the String Tab, Changing the Fill character to 'NULL""Spaces"'Zeros" and "FF"
*- on the Timing tab, changing the handshake reset type to " Zero to Non-Zero Tran" and to "Zero to Non-Zero"
Any Idea will be really usefull:doh2: Thank you
With the old rev (9.x) of Studio I did not get the last characters.
I tried: on the "String Input Enable"
*- on the String Tab, Changing the Fill character to 'NULL""Spaces"'Zeros" and "FF"
*- on the Timing tab, changing the handshake reset type to " Zero to Non-Zero Tran" and to "Zero to Non-Zero"
Any Idea will be really usefull:doh2: Thank you
