Hi, I have two festo cpx terminals with modules fb-13 and I want to make profibus communication between them. One of them will be master, second will be slave. On both terminals I have cpx-cec controllers and fb-13 fieldbus modules. Can you tell me how to do it or give some helpful examples / materials? I found some materials on festo website but they contains instructions only for step7, nothing about codesys. I made connection between them, set switches on fieldbus modules but now all I have is bus fault on master's fb-13 and system fault on slave terminal. Sorry for my english but I hope you understand my problem.
[Festo, Codesys] Profibus connection between valve terminals
- Thread starter mchtr
- Start date
Similar Topics
Hi. We've been asked to do an upgrade on plant, consisting on a PLC upgrade. This involves replacing a 1747-SDN module to a 1769-SDN, in a network...
Glad the site is working again... I have a customer having issues with a Festo and I have never worked with them, see below
Working with a Siemens PLC, I have to replace a bad Festo valve bank Profinet adapter with part number: CTEU-PN
I am very comfortable with...
Hello Experts,
Does anyone have this gsdml v2.31 festo cteu 20150503?? I've gone to the Festo website and the version that they have for cteu is...
Hello everyone,
It's the first experience with a Festo's drives and the Festo Configuration Tool programming tool.
Particularly with these...