A couple of questions with RS500 FFL-FFU instruction set.
1-Does the stack load from the bottom or the top, My stack is
#N7:50 with a length of 20, so does the first one go into 50 or 79.
2- Can I change a value in the stack with a move to that location.
I want to set up an HMI to view the stack and possibly make a change
to one of the words if needed. Thanks
1-Does the stack load from the bottom or the top, My stack is
#N7:50 with a length of 20, so does the first one go into 50 or 79.
2- Can I change a value in the stack with a move to that location.
I want to set up an HMI to view the stack and possibly make a change
to one of the words if needed. Thanks