Steve Kemp
Member
- Join Date
- Nov 2003
- Posts
- 122
Hi all. I'm just starting out with CX Programmer... Looks like fun. As an exercise, I'm attempting to translate a bit of an RSLogix program. So, a few questions spring to mind:
What is the CX equivalent of the RSLogix B3-type registers/bits for internal use?
How do I use the value of a counter to drive the source word of, say, the MLPX(076)function?
From the contacts tools bar, I am unable to plant a branched contact around an existing contact by selecting it with the mouse and dropping it onto the rung. It appears that I have to construct the branch from lines; what am I missing?
Is it mandatory for all function blocks to be preceded by a contact?
I think that's enough for now.
Thanks.
What is the CX equivalent of the RSLogix B3-type registers/bits for internal use?
How do I use the value of a counter to drive the source word of, say, the MLPX(076)function?
From the contacts tools bar, I am unable to plant a branched contact around an existing contact by selecting it with the mouse and dropping it onto the rung. It appears that I have to construct the branch from lines; what am I missing?
Is it mandatory for all function blocks to be preceded by a contact?
I think that's enough for now.
Thanks.