David Garaudy
Member
- Join Date
- Sep 2003
- Posts
- 1
I would like to flash a light. When a device is in alarm I need to flash a light. I need to keep it simple.
Thanks,
David Garaudy
Thanks,
David Garaudy
LT_OFF LT_ON
---|/|------------(TON)
LT_ON LT_OFF
---| |------------(TON)
ALARM LT_ON LIGHT
---| |-----| |-----( )
If David uses the ALT instruction as you suggested, that lamp will flash quite fast! At a frequency of 1/2 the current scan time! I hope he isn't using a relay output! (buzzzz)monkworm said:this will alternate light on and off untill alarm is cleared