Please could someone put me in the right direction.
I'm using first FT View Studio for the first time, so I have modified a sample template just to set up the ethernet comms link between the pc and PV 1500 terminal vers 6.0 and Studio vers 5.10.
As I understand these two versions need to be matched before I can download into the terminal.
I'm unable to upgrade the firmware in the PV as it is saying that it is unable to connect to remote terminal.
I can view the terminal and plc in the Linx Enterprise browser, and can also 'ping' the terminal.
I have also have made a device shortcut and then copied into runtime from local and created a runtime application and tried to transfer that into the terminal but it's coming back with destination selected is not a valid device. That is why I thought there is a mismatch in versions.
Please any ideas to what I do next, I have been on this for a couple of days.
Many Thanks
Steve
I'm using first FT View Studio for the first time, so I have modified a sample template just to set up the ethernet comms link between the pc and PV 1500 terminal vers 6.0 and Studio vers 5.10.
As I understand these two versions need to be matched before I can download into the terminal.
I'm unable to upgrade the firmware in the PV as it is saying that it is unable to connect to remote terminal.
I can view the terminal and plc in the Linx Enterprise browser, and can also 'ping' the terminal.
I have also have made a device shortcut and then copied into runtime from local and created a runtime application and tried to transfer that into the terminal but it's coming back with destination selected is not a valid device. That is why I thought there is a mismatch in versions.
Please any ideas to what I do next, I have been on this for a couple of days.
Many Thanks
Steve