I am using FTView SE 5.10
I am trying to figure out the best way to do the following.
I have a graphics display that contains 10 String Display objects and a Combo Box. When the user makes a selection from the combo box I want to assign a tag to each string display for viewing of the tag data. The tags will be different based on the user selection of the combo box.
For Example:
Combo Box has five choices SITE 1 through SITE 5.
There are 10 String Display Objects STRINGDISPLAY1 through STRINGDISPLAY10.
When user selects SITE 1 in the combo box I want to map a tag named
SITE_01_DATA1 to STRINGDISPLAY1
.
.
.
SITE_01_DATA10 to STRINGDISPLAY10
When user selects SITE 2 in the combo box I want to map a tag named
SITE_02_DATA1 to STRINGDISPLAY1
.
.
.
SITE_02_DATA10 to STRINGDISPLAY10
etc, etc. I figured underlying VBA code to do this but not sure exactly the best most efficient way to do this. Your help is greatly appreciated.
I am trying to figure out the best way to do the following.
I have a graphics display that contains 10 String Display objects and a Combo Box. When the user makes a selection from the combo box I want to assign a tag to each string display for viewing of the tag data. The tags will be different based on the user selection of the combo box.
For Example:
Combo Box has five choices SITE 1 through SITE 5.
There are 10 String Display Objects STRINGDISPLAY1 through STRINGDISPLAY10.
When user selects SITE 1 in the combo box I want to map a tag named
SITE_01_DATA1 to STRINGDISPLAY1
.
.
.
SITE_01_DATA10 to STRINGDISPLAY10
When user selects SITE 2 in the combo box I want to map a tag named
SITE_02_DATA1 to STRINGDISPLAY1
.
.
.
SITE_02_DATA10 to STRINGDISPLAY10
etc, etc. I figured underlying VBA code to do this but not sure exactly the best most efficient way to do this. Your help is greatly appreciated.