sheryl86_ann
Member
Greetings..
I had troubleshoot on one of our client's hmi and heres the scenario:
Based on the touch switch test, I concluded that their existing hmi need to be replaced.Following resasons are:
1. Touch switch not operational
2. Cannot perform touch switch adjustments
3. Has white spot on the screen that may damage the internal circuitry
4. Unit too old
Thus, I need to get all the specifications necessary in order to order a new model. However, I cannot communicate on their existing hmi (trying to read the hmi program). The model is: Fuji UG400H-T1T1. The PLC they are using is Fuji also, micrex-F using T link from PLC to HMI. Now, does anyone in this circulation had encountered same model? A manual of the same model is of great help but i could not find in the internet. there might be its equivalent model but I need to know that also.
Some data i had: 16 inches, 16 color, 1640 x 480, no memory expansion.Do i lack something to consider?
Has anyone tried replacing one hmi to another of different model? What in particular?
Thank you very much for any help.
Sheryl
Philippines
I had troubleshoot on one of our client's hmi and heres the scenario:
Based on the touch switch test, I concluded that their existing hmi need to be replaced.Following resasons are:
1. Touch switch not operational
2. Cannot perform touch switch adjustments
3. Has white spot on the screen that may damage the internal circuitry
4. Unit too old
Thus, I need to get all the specifications necessary in order to order a new model. However, I cannot communicate on their existing hmi (trying to read the hmi program). The model is: Fuji UG400H-T1T1. The PLC they are using is Fuji also, micrex-F using T link from PLC to HMI. Now, does anyone in this circulation had encountered same model? A manual of the same model is of great help but i could not find in the internet. there might be its equivalent model but I need to know that also.
Some data i had: 16 inches, 16 color, 1640 x 480, no memory expansion.Do i lack something to consider?
Has anyone tried replacing one hmi to another of different model? What in particular?
Thank you very much for any help.
Sheryl
Philippines
Last edited: