lendyck
Member
A question to those unfortunate souls that have had to work with GE Fanuc PLCs...
I'm using an RX3i. How can I get the time from the PLC? I found the data type TIME_OF_DAY in the Toolchest, but unfortunately, it doesn't take the liberty to fill in the reference addresses for me when I drag it to my variables, so all I have are 0's!
Many thanks.
Len
I'm using an RX3i. How can I get the time from the PLC? I found the data type TIME_OF_DAY in the Toolchest, but unfortunately, it doesn't take the liberty to fill in the reference addresses for me when I drag it to my variables, so all I have are 0's!
Many thanks.
Len