get and set time picker value in citect scada process analyst via cicode

z.saadati

Member
Z
Join Date
Aug 2017
Location
ney
Posts
1
I want to get and set Time Picker value in process analyst in citect scada using cicode.

Also I tried to find an event or function when time picker value is changed , is called but find nothing.

May you help me please?
 

Similar Topics

dalporto
InTouch "SET" button
Hi all. Weird thing happening. I do a "set" from a button for a command (direct Discrete Value, no script), waiting for the L82 PLC to set it...
Replies
1
Views
64
robertmee
R
B
No timer reset
Hello, I still do not have equipment in to test. But the RTAC ladder does not have a timer reset coil. I wonder if a reset coil on Timer.IN is...
Replies
1
Views
140
drbitboy
drbitboy
N
DVP-14SS2 program does not Run after Power Reset
Hi, i am using DVP-14SS2 PLC, after program written to plc, when power is reset, plc doesn't run. always need to connect to pc for the run mode.
Replies
0
Views
82
nadeem2nazar
N
J
Emergency Stop reset Siemens
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
2
Replies
19
Views
422
John Lee
J
K
Omron AD081-V1 Analog Input Card Calibration (Offset & Gain Adjustment)
Omron AD081-V1 Analog Input Card Offset & Gain Adjustment Entering Adjustment Mode 1. Set the input card in adjustment mode (Turn ON Dip SW No-1)...
Replies
0
Views
127
Ko Lin
K
Back
Top Bottom