dalem
Member
I have been instructed to teach one of my maintenance guys on each shift to hook up a laptop to a couple PLC5s, so that they can trouble shoot problems like I do, so that they don't have to call me at 3:00am. (We have some SLCs also, so I may need to do them too.)
I will also need to teach them how to read through the logic to find a problem if needed, but what scares me most is that one could mess up the program unintentially or modify it intentially.
Are there any programs which just allows one to go online and watch all that's happening or would it be best to just use my RSLogix5 and do something with the password features? I have not read much on using the password features in RSLogix, so I'm just looking for suggestions at this point.
Thanks in advance,
Dale
I will also need to teach them how to read through the logic to find a problem if needed, but what scares me most is that one could mess up the program unintentially or modify it intentially.
Are there any programs which just allows one to go online and watch all that's happening or would it be best to just use my RSLogix5 and do something with the password features? I have not read much on using the password features in RSLogix, so I'm just looking for suggestions at this point.
Thanks in advance,
Dale