Ramsri
Member
Hi all,
Does any one have communicated Proface agp3000t-ca1m with htb1c0dm9lp by can open master. Really i have been struck with this communication. I have configured 11 inputs & 8 outputs as per the hardware given & while plugging the device. Can open port error led lit & htb module run led blinks continuously. There is no problem with the comm. cable since if the cable is removed, Error Led in the htb unit is lit. proface hmi shows RGEE151(Unexpected state for one or more optional slaves). i hae set the defsult id 127 & 250kps in the htb thro' poteniometer, does anyone have faced & solved this before?
your feedback's are much appreciated.
Ram
Does any one have communicated Proface agp3000t-ca1m with htb1c0dm9lp by can open master. Really i have been struck with this communication. I have configured 11 inputs & 8 outputs as per the hardware given & while plugging the device. Can open port error led lit & htb module run led blinks continuously. There is no problem with the comm. cable since if the cable is removed, Error Led in the htb unit is lit. proface hmi shows RGEE151(Unexpected state for one or more optional slaves). i hae set the defsult id 127 & 250kps in the htb thro' poteniometer, does anyone have faced & solved this before?
your feedback's are much appreciated.
Ram