Fran_Spain
Member
Greetings from Spain ..
Help with AC 500 ABB plc.
I have the need to replace a cpu PM573 PM 581 on the other, the reason is a breakdown ...
PM573 cpu is new from the factory, and I can not configure the TCP / IP address, not detected 'IP config' CoDeSys.
Do I have to assign any local timber address? As can be 0.0.0.0
thanks
Help with AC 500 ABB plc.
I have the need to replace a cpu PM573 PM 581 on the other, the reason is a breakdown ...
PM573 cpu is new from the factory, and I can not configure the TCP / IP address, not detected 'IP config' CoDeSys.
Do I have to assign any local timber address? As can be 0.0.0.0
thanks