Help to combine bet. LS plc "XGT" with schneider HMI & scada

samersamy

Member
S
Join Date
Nov 2014
Location
giza
Posts
2
Dear fellows,

I need to know what is the protocol which i can use in LS plc to make the schneider HMI and scada work with it .
I have alot of ethernet protocol types.
according to your answer I will buy the communication module.

2nd question:should I buy an LS ethernet switch or I can buy from schneider the switch
 

Similar Topics

S
Citect Web Client - Help
Hello everyone. Could someone please assist me? I am using Citect version 7.2 service pack 5 and Windows 7. I have created a project...
Replies
0
Views
56
Sirwan
S
C
Chevalier FSG-2460TX Help
Hello, I'm not sure if anyone can help me. I made a big mistake by pulling out the battery to swap it with the machine turned off, and as a...
Replies
0
Views
44
Chris Reed
C
C
Panelview Plus 7 Help
I've adjusted the IP of the Panelview Plus as well as the DNS servers; the screen does not show up in the search when I go to the transfer utility...
Replies
3
Views
113
patrickmoneyy
P
P
Help w/ Proficy Machine Edition - GE Versamax Controller (Student License)
Hi Everyone, I own a GE Versamax controller that I purchased for a class at Long Beach City College a couple of years ago. I lost the use of my...
Replies
11
Views
237
Steve Bailey
Steve Bailey
A
need help
I was wondering if anyone could help i am trying to use a SLC 500 with a 5/05 processor to set up an incremental encoder to a HSCE2 card? The card...
Replies
2
Views
172
adam 1432
A
Back
Top Bottom