sparkytex
Lifetime Supporting Member
Hey guys,
So after installing the 1769-ECR end cap on my compact logix system my I/O faults went away which is great. However, after going online with the program that I downloaded to the processor I cannot get any of the I/O to work at all. The processor is in run mode and no matter which bits I toggle I cannot get an output to turn on. Same goes for inputs, If I jump 120v straight to an input the PLC input card LED light does not light up and you cannot see it go true on the rungs.
I've looked through a bunch of stuff but I cannot figure out why this is happening. I'm sure its something stupid that I've overlooked but any help is appreciated.
- Tex
So after installing the 1769-ECR end cap on my compact logix system my I/O faults went away which is great. However, after going online with the program that I downloaded to the processor I cannot get any of the I/O to work at all. The processor is in run mode and no matter which bits I toggle I cannot get an output to turn on. Same goes for inputs, If I jump 120v straight to an input the PLC input card LED light does not light up and you cannot see it go true on the rungs.
I've looked through a bunch of stuff but I cannot figure out why this is happening. I'm sure its something stupid that I've overlooked but any help is appreciated.
- Tex