kentuckytech
Member
I have been scratching my head for a couple of days on this issue. I am in the process of converting a program from rs500 to Studio 5000 and everything was going great until I came across several rungs that had some indirect addressing used. I have been researching on this and other sites but have not been able to find a solution I could implement and I was hoping someone with more experience could help me. I downloaded the Converting PLC-5 or SLC 500 Logic to Logix-Based Logic reference manual from Rockwell and tried to the best of my knowledge to follow the instructions but the results were all bad. I keep getting "invalid tag element" errors. I have attached the original program and was going to attach my converted version but it is over the size limit. The rung I'm stumped on is 10 in ladder 60 but the following rungs 15,42,47 and 48 in ladder 60 also has some addressing I'm unsure on how to convert. Any help getting me on the right track would be appreciated.
Last edited: