Hi,
I'm using a Micrologix 1500 PLC with a HSC. I have two identical encoders wired differentially. One encoder is downstream from the other. I need a sample code to check both figures are within 2" of each other and set a bit if not. I already have one calibrated to the proper length conversion.
Any help would be greatly appreciated.
Lou
I'm using a Micrologix 1500 PLC with a HSC. I have two identical encoders wired differentially. One encoder is downstream from the other. I need a sample code to check both figures are within 2" of each other and set a bit if not. I already have one calibrated to the proper length conversion.
Any help would be greatly appreciated.
Lou