hi frz, how to configure pointguard I/O rs232 acsii module in compact LOGIX L43S
- Thread starter shebindas
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
To get started, I recommend the User Manual, which is available from the RA Literature website.
Direct link to PDF: 1734-UM009
If you have a specific question about your application, please describe it in detail. Begin with the network adapter you are using, and describe the device and protocol you are connecting the module to.
The 232ASC module is not a Safety module, so it is configured in a GuardLogix controller the same was as with any standard controller.
Direct link to PDF: 1734-UM009
If you have a specific question about your application, please describe it in detail. Begin with the network adapter you are using, and describe the device and protocol you are connecting the module to.
The 232ASC module is not a Safety module, so it is configured in a GuardLogix controller the same was as with any standard controller.
im using rs232ASCII module to transmit ascii information to TELESIS420 scribing machine. Kindly support with the configuration
the H/W config reads as follows: AENTR(ethernet adapter), IB8,OB8E,and RS232ASC
Similar Topics
Hi folks.
I have a system that I'm working on that needs 2 alarms banners with different event subscription:
- One banner for a specific area...
hi all i am new here i have a mitsubishi smart touch hmi i.e ms-60t-pe but i cannot find a software to edit and download a program in it any help...
Hello,
I am trying to connect a Stride Analog Output module to a 1769 CompactLogix via Ethernet. I added a new Generic Ethernet Module for the...
Dear all,
I am beginer in ifix hmi programming. I have 2 ifix 6.0 pc with license FiX and client..
Can some one tell me how to configure sample...
Hi all,
the machine I am programming the Rockwell PLC for has about 100 parameters that need to be adjusted for every customer.
I would like to...