I am posting this as I am at a loss on where else to look. We have a 30 year old Mitsubishi Injection molding machine run by a Hitachi P-250E PLC (or sequencer as tech support calls it). I did manage to purchase a programmer unit but it is far from user friendly. The Mitsubishi manuals are very comprehensive on certain aspects of the programming but tags are few and far between on the virtual aspects vs physical switches sensors etc. so troubleshooting this dinosaur machine is a real challenge. Even the one source for tech support is not very savvy in providing help due to the age.
I have searched most everywhere for a P250-E instruction manual and have only located one on Ebay in Australia, being sold as a package with a different Hitachi PLC. I did message the seller asking if he would be willing to sell them seperately but have not heard back.
So any ideas from members here on where to obtain one ?
Thanks in advance.
I have searched most everywhere for a P250-E instruction manual and have only located one on Ebay in Australia, being sold as a package with a different Hitachi PLC. I did message the seller asking if he would be willing to sell them seperately but have not heard back.
So any ideas from members here on where to obtain one ?
Thanks in advance.