Kamputty
Member
Hi all,
I hope all is well with you and yours.
I have a Allen Bradley Panelview T4T HMI, and everything is working fine. My question is, is there a way to delay the bootup time for the HMI?
Meaning, when I power up my HMI and PLC, the PLC takes about 30 more seconds to bootup completely, but my HMI has already started and "asking" for data from the PLC; this causes an error on the HMI until the PLC comes online.
Is there a way to tell the HMI to wait 60 seconds for a boot up etc?
Thanks!
~Kam
I hope all is well with you and yours.
I have a Allen Bradley Panelview T4T HMI, and everything is working fine. My question is, is there a way to delay the bootup time for the HMI?
Meaning, when I power up my HMI and PLC, the PLC takes about 30 more seconds to bootup completely, but my HMI has already started and "asking" for data from the PLC; this causes an error on the HMI until the PLC comes online.
Is there a way to tell the HMI to wait 60 seconds for a boot up etc?
Thanks!
~Kam