Looking to find a programming cable to download an already developed Quick Panel application which I have the software for. The hardware is a QPK-2D200-L2P-E Monochrome 6" LCD 24V and I think from what I've seen within the manual and the afforded min DIN Tool Connector Port on the Hardware that I need a HMI-CAB-C49 to complete the connection to download the file. Issue is when searching for the HMI-CAB-C49 cable there are a couple variants with a trailing letter within the part number -H or -J as well as a couple without any trailing letter. My assumption would be that the trailing alpha character is the version of the cable with the -H being an earlier release then then -J (not sure what the lack of a trailing alpha character indicates). I also haven't seen any matrix in regards to compatibility of the hardware with a specific cable version, and with the Total Control Product line absorbed its difficult to find information. Any help in this would be greatly appreciated as my experience with the product line is somewhat limited. Thanks in advance for the help.
Last edited: