Jethro Baidoo
Member
Good morning all.
I replaced a 315-2PN/DP CPU.
I downloaded the hardware config and the blocks.
After this exercise some HMI tabs are missing.
I didn’t do any work on the HMI.
A tab was showing tank level % but it’s no longer appearing.
How do I tackle this?
Thanks
I replaced a 315-2PN/DP CPU.
I downloaded the hardware config and the blocks.
After this exercise some HMI tabs are missing.
I didn’t do any work on the HMI.
A tab was showing tank level % but it’s no longer appearing.
How do I tackle this?
Thanks