nightline
Member
Gents,
I've a CompactLogix L35E V19 and a Telemecanique XUW vision sensor.
There is an EDS file from the XUW, and I used the EDS hardware wizard tool to install the EDS file.
Now I like to add the XUW in the IO tree, but can't find the unit in the available modules.
I also looked in RSLinx to see if the XUW is recognized, but didn't see it.
I tried to add the XUW in RSLogix 5000 V20, and imported the EDS file, and the module for the XUW is available in this version.
How can I add this EDS file in V19?
Thanks in advance!
Jack
I've a CompactLogix L35E V19 and a Telemecanique XUW vision sensor.
There is an EDS file from the XUW, and I used the EDS hardware wizard tool to install the EDS file.
Now I like to add the XUW in the IO tree, but can't find the unit in the available modules.
I also looked in RSLinx to see if the XUW is recognized, but didn't see it.
I tried to add the XUW in RSLogix 5000 V20, and imported the EDS file, and the module for the XUW is available in this version.
How can I add this EDS file in V19?
Thanks in advance!
Jack