elevmike
Member
PM ti me from crowdju:
First got to this link: PDF 995 and download all four files and run them to install PDF9 995.
Then startup LogixPro or whatever, and do a normal printout of your program just as if you were going to print to your printer. However when you get the print dialog box choose there printer "pdf 995"
Take note of where the print file will be stored. Then when you do a post attach the file using the brouse button under the text window.
I'll be waiting.. Mike
"Been drastically working on and researching the elevator program. After all this time and 28.00 for LogixPro ( That didnt help ) I have finally " I think " gotten it. I finished writing it at school, but before I run it by my teacher. wanted to see if you would take a look. Kinda dumb founded as to how to get it onto here though. You made a comment about putting it into pdf? I believe.. How exactly would I need to post it so you could view it?
Thanks for your help...
__________________
- PLC Kid
First got to this link: PDF 995 and download all four files and run them to install PDF9 995.
Then startup LogixPro or whatever, and do a normal printout of your program just as if you were going to print to your printer. However when you get the print dialog box choose there printer "pdf 995"
Take note of where the print file will be stored. Then when you do a post attach the file using the brouse button under the text window.
I'll be waiting.. Mike