How to read a Character Array from a Panel View 600

Zasil

Member
Z
Join Date
Dec 2007
Location
Chihuahua
Posts
1
Hi!

I have an ASCII Entry control in an application on a Panel View 600 and i need to read from the PLC the characters entered in that control. What should be the tag of this control? and how do i call this tag from the PLC?
 

Similar Topics

R
How to read/write changes to an existing AB FTView SE program
Hello, I am fairly experienced programming and modifying existing FTView ME programs. I have also used FTView SE to make modifications to a...
Replies
5
Views
133
Operaghost
Operaghost
L
Read pulses from a magnetic-inductive flow meter and modify pulses by a user inputted valve and to output the modified rate to another pulse reader
Hi, The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001. I will set the flow meter...
Replies
4
Views
211
Steve Bailey
Steve Bailey
A
Logix 5000 FAL Read Every Other Member
Is there a way to use the FAL instruction to do +=2 instead of +=1? I have an array that is organized with alternating "data" and "flag" values...
Replies
5
Views
153
AMarks95
A
C
ControlLogix read force status in plc program
Hi everyone i have a customer, who wants to show an alarm on the machine, if the I/O forces are enabled and set, on at ControlLogix L81E with...
Replies
3
Views
297
crawler009
C
L
Read real data from hmi to plc
Hi Iam using monitouch hmi(V9 soft) with omron plc cj2m (CX programmer). In this I want to read a data from hmi to plc. The data was like...
Replies
0
Views
124
Lee sung
L
Back
Top Bottom