How to simulate 2 cpu using Step7 plcsim
i tried with no success
i followed this guide here
http://support.automation.siemens.c...lib.csinfo&lang=en&objid=38726592&caller=view
but got stuck at For the second CPU to be simulated, you select the interface parameterization (PG/PC interface) configured in the hardware configuration
i use MPI
Master cpu is MPI 2
Slave cpu is MPI3
i cant find download block to plcsim 2
i tried with no success
i followed this guide here
http://support.automation.siemens.c...lib.csinfo&lang=en&objid=38726592&caller=view
but got stuck at For the second CPU to be simulated, you select the interface parameterization (PG/PC interface) configured in the hardware configuration
i use MPI
Master cpu is MPI 2
Slave cpu is MPI3
i cant find download block to plcsim 2
Last edited: