Hello Everyone,
Please I am doing an application now using CPU 1500 and encoder type sick VDF60A connect to the PLC through remote I/O and module TM Count 1*24vdc + using HSC block.
I am trying to monitor the speed of the motor.
my problem is I am getting value but the value seems not correct and very low value add to that I am getting StatusUp and StatusDown output signals from HSC block active but the motor still running in the same direction.
And when I checked again the wiring and I believe I am connecting A with A and B with B phases but the point here is I am getting feedback from A and B at the same time then the error is happening.
error signal is true and Error ID is 16#80A2
Please any information will be appreciated.
Thanks,
Sayed
Please I am doing an application now using CPU 1500 and encoder type sick VDF60A connect to the PLC through remote I/O and module TM Count 1*24vdc + using HSC block.
I am trying to monitor the speed of the motor.
my problem is I am getting value but the value seems not correct and very low value add to that I am getting StatusUp and StatusDown output signals from HSC block active but the motor still running in the same direction.
And when I checked again the wiring and I believe I am connecting A with A and B with B phases but the point here is I am getting feedback from A and B at the same time then the error is happening.
error signal is true and Error ID is 16#80A2
Please any information will be appreciated.
Thanks,
Sayed