jolio ST
Member
Hello guys.
I am doing this program using Twidosoft. But this is my first time doing this and I have a lot to queried. I hope someone can help me please...I have to get this done by today (Singapore time 7pm, 7am in parts of US).
I have 4 generator control panels, and 1 master control panel. I had already completed the program for the generator panels, but I am confused in the programming of the analog inputs in the master control panel.
I have set the device to communicate by modbus for all panels. and It seem to be working fine. Now here comes my problem.
The 4 to 20 mA signal will come from a power meter of each generator. When a genset is activated, the master panel is to receive the signal and add it to a counter. This counter will have to calculate how many gensets are in operation, and what is the total load they are carrying. but when one of the genset is off, it will also have to update the total number of gensets still on, and the load they are carrying.
I have attached below one of the printsreens of the program. I really need suggestion on how to make the above stated function work using Twido$oft. They have that function on Idec windLdr but not in Twido.
Please help me. Thank you
regards
Sherine T.
I am doing this program using Twidosoft. But this is my first time doing this and I have a lot to queried. I hope someone can help me please...I have to get this done by today (Singapore time 7pm, 7am in parts of US).
I have 4 generator control panels, and 1 master control panel. I had already completed the program for the generator panels, but I am confused in the programming of the analog inputs in the master control panel.
I have set the device to communicate by modbus for all panels. and It seem to be working fine. Now here comes my problem.
The 4 to 20 mA signal will come from a power meter of each generator. When a genset is activated, the master panel is to receive the signal and add it to a counter. This counter will have to calculate how many gensets are in operation, and what is the total load they are carrying. but when one of the genset is off, it will also have to update the total number of gensets still on, and the load they are carrying.
I have attached below one of the printsreens of the program. I really need suggestion on how to make the above stated function work using Twido$oft. They have that function on Idec windLdr but not in Twido.
Please help me. Thank you
regards
Sherine T.
Last edited: