chongandrew
Member
Hi there,
I have an application where I’m required to connect Siemens S7-300 PLC (Profinet) to Allen Bradley Control Logix Remote I/O Rack & Allen Bradley FLEX I/O (both Remote I/O in EtherNet/IP, without CPU) with the following hardware:
1 x Siemens S7-300 [PLC - Profinet]
1 x AllenBradley 1756-EN2TR [Communication Interface - EtherNet/IP]
2 x AllenBradley 1756-IB32 [Digital Input Module]
1 x AllenBradley 1756-OB32 [Digital Output Module]
1 x AllenBradley 1756-OW16I [Digital Relay Output Module]
1 x AllenBradley 1794-AENTR [Communication Interface - EtherNet/IP]
1 x AllenBradley 1794-IB32 [Digital Input Module]
1 x AllenBradley 1794-OB16 [Digital OutputModule]
Has anyone done something similar?
or does this even possible?
Please also find the System Overview concept draft in the attachment
I have an application where I’m required to connect Siemens S7-300 PLC (Profinet) to Allen Bradley Control Logix Remote I/O Rack & Allen Bradley FLEX I/O (both Remote I/O in EtherNet/IP, without CPU) with the following hardware:
1 x Siemens S7-300 [PLC - Profinet]
1 x AllenBradley 1756-EN2TR [Communication Interface - EtherNet/IP]
2 x AllenBradley 1756-IB32 [Digital Input Module]
1 x AllenBradley 1756-OB32 [Digital Output Module]
1 x AllenBradley 1756-OW16I [Digital Relay Output Module]
1 x AllenBradley 1794-AENTR [Communication Interface - EtherNet/IP]
1 x AllenBradley 1794-IB32 [Digital Input Module]
1 x AllenBradley 1794-OB16 [Digital OutputModule]
Has anyone done something similar?
or does this even possible?
Please also find the System Overview concept draft in the attachment