iFix with Micro850

King567

Member
Join Date
Jun 2020
Location
Berlin
Posts
1
Hello,

We have a system where we have iFix 5.1 and now we have a new PLC Micro850. So my question is what driver can I use to communicate with that PLC. Now we have ABR driver version 7.45a together with RSLinx but I am not sure can I use that driver with that PLC or I should buy the IGS driver? And can I use something else except the IGS driver?
 
Last edited:
You could use Kepserver or many of the other OPC servers the cost of a driver from them is about £600.00 however, this was a year ago
 

Similar Topics

Hi I have a ifix 5.5 application where the operator opens a valve by clicking on a screen object. I can trace from object to data base that it is...
Replies
2
Views
66
Dear all, I am beginer in ifix hmi programming. I have 2 ifix 6.0 pc with license FiX and client.. Can some one tell me how to configure sample...
Replies
0
Views
180
Hello, I have to deal with iFix again and am looking at the most efficient way to create alarms to display in iFix, i.e. not creating an...
Replies
0
Views
178
Hi everyone. I'm beginner with Ifix. I'm appreciate if you share me some document to understand how to play with Ifix 6.0. By the way, I have some...
Replies
11
Views
757
Hi everyone. Ifix scada is new for me. Please help help me to clarify is it possible to open Ifix scada runtime on dual monitor and how to do? Thanks
Replies
1
Views
475
Back
Top Bottom