ballack Member B Join Date Jul 2013 Location TX Posts 30 Aug 14, 2013 #1 Hey guys, I'm redeveloping an old FactoryTalk ME application in Wonderware, the thing is that they were using some of the AB faceplates (i.e. powerflex, PIDE). So my question is, how can I import those into my Wonderware application?
Hey guys, I'm redeveloping an old FactoryTalk ME application in Wonderware, the thing is that they were using some of the AB faceplates (i.e. powerflex, PIDE). So my question is, how can I import those into my Wonderware application?
Paullys50 Lifetime Supporting Member P Join Date Jan 2006 Location WI Posts 2,188 Aug 14, 2013 #2 You cannot import them across vendor platforms. You will need to engineer your own.
ballack Member OP B Join Date Jul 2013 Location TX Posts 30 Aug 14, 2013 #3 I've read somewhere else that you can use some sort of activex control for that, but I am not sure how to do that.
I've read somewhere else that you can use some sort of activex control for that, but I am not sure how to do that.