Hi guys,
New to indirect addressing is anyone able to help me with the attached file. I have tried the pen and paper method and first I put the source address to #19:2 and then I entered the data 3, 7 and 14 into the NEQ instruction. I checked the destination address and I received 73, 74 and 75. Next I changed the the source address to #19:3 and entered in the same data and this time I received 120, 80 and 560.
So based on your information I believe the starting addresses of the data are as follows:
Input 3 and the starting address is N73:120
Input 7 and the starting address is N74:80
Input 14 and the starting address is N75:560
Based on the above do you believe I have identified this correctly with respect to the pdf I attached?
Thanks again for your input.
Regards
New to indirect addressing is anyone able to help me with the attached file. I have tried the pen and paper method and first I put the source address to #19:2 and then I entered the data 3, 7 and 14 into the NEQ instruction. I checked the destination address and I received 73, 74 and 75. Next I changed the the source address to #19:3 and entered in the same data and this time I received 120, 80 and 560.
So based on your information I believe the starting addresses of the data are as follows:
Input 3 and the starting address is N73:120
Input 7 and the starting address is N74:80
Input 14 and the starting address is N75:560
Based on the above do you believe I have identified this correctly with respect to the pdf I attached?
Thanks again for your input.
Regards