instal plc s7

Not.
At the moment Simatic Step7 is not compatible with 64-bit operating systems.
Best way to go at the moment is to use a VMware or the built in XP mode which can apparently be set to 32-bit.
 

Similar Topics

B
uninstal simatic manager
some body help me please how to completly uninstal S7 simatic manager from my PC
Replies
5
Views
2,224
bleach
B
M
RSlogix instal
Hi, I need some help with the software RSlogix from allen bradley. I do all the instal and move key .... all work fine at this point but when...
Replies
8
Views
4,387
Rick Densing
R
J
New to PLC
Trying to learn PLCs going to start by buying an Arduino Opta Wifi to practice with but what's the PLC I should get next?
Replies
1
Views
18
drbitboy
drbitboy
M
Error when reading from PLC GX Developer
Hello, When I try to read from the PLC, the following error occurs: There is no project name. Failed to read the intelligent function module...
Replies
1
Views
47
parky
P
E
How to get data from multiple Mitsubishi Q03UDVCPU into master PLC Q03UDVCPU through QJ71E71-100 ?
Hi, How to get data from multiple Mitsubishi Q03UDVCPU into master PLC Q03UDVCPU through QJ71E71-100 ?
Replies
1
Views
32
parky
P
Back
Top Bottom