redhorse
Member
I was trying to make a ladder program using Bit type (e.g. B3/0) as an internal relay but once I compile the program, I got an error. Is it really possible to use bit type using rslogix micro starter or it's only applicable to rslogix 500 software. If it is possible how will I encode it. The micrologix 1000 user manual pp. 6-3 discusses about bit instruction but it doesn't show how to put it in ladder. There are also ladder program examples in pp. E-1 to E-41 that utilizes bit type internal relay but no discussion on how to put in ladder. Maybe the examples are based on rslogix 500 software.