The Plc Kid
Member
Here is the data plate info.
Voltage / 230/460
HP / 30
Frame /286 T
Poles / 4
Rpm / 1765
Hz / 60
Fla / 74/37
Enc /TEBC
Duty / Cont
Type / TFP
Max Amb / 40c
Code F
Design / A
Nema Nomm Eff / 91.0
Service Factor / 1.0
Insulation Class / H1
Torque Range / 2-60 Hz
Max Safe Rpm / 3600
50% more Torque would be ideal.
Would it be best to increase hp to 50 or go with 6 pole motor
From dick dv post i understand that by going with more poles i will increase starting torque only?
I need to increase continious torque.
Voltage / 230/460
HP / 30
Frame /286 T
Poles / 4
Rpm / 1765
Hz / 60
Fla / 74/37
Enc /TEBC
Duty / Cont
Type / TFP
Max Amb / 40c
Code F
Design / A
Nema Nomm Eff / 91.0
Service Factor / 1.0
Insulation Class / H1
Torque Range / 2-60 Hz
Max Safe Rpm / 3600
50% more Torque would be ideal.
Would it be best to increase hp to 50 or go with 6 pole motor
From dick dv post i understand that by going with more poles i will increase starting torque only?
I need to increase continious torque.