Here's what I got:
A 17 slot control logix rack with 2 - 1756-ENBT modules.
One ENBT module(information hwy)(I/P=170.166.99.100) communicates with a PC running Wonderware, PC running RSL5000 along with the mill's main ethernet network.
The other ENBT module (control hwy) (I/P=10.10.10.10) communicates with a couple of FlexLogix remote racks via a 1794-AENT module (I/P=10.10.10.11 & 10.10.10.12 & 10.10.10.13).
Note: All subnets are 255.255.255.0
When I run RSLinx, I expand the following tree:
-Workstation(170.166.99.200)
----AB_ETH-1,Ethernet
--------1756-ENBT(170.166.99.100) (1st ENBT module)
------------ControlLogix BackPlane
---------------1756-ENBT(10.10.10.10) (2nd ENBT module)
-------------------AB_ETH-1,Ethernet
-----------------------????
Question #1:
I was expecting to view the 10.10.10.xx flex AENT modules where the ???? are above. Why can't I see them?
Question #2:
I'm going to add a PanelView 600(ethernet) to this system. My question is should I add the PanelView 600 to the Info Hwy and give it a "real" IP Addr or the Control Hwy and give it a 10.10.10.xx IP Addr. If I add it to the Conrtrol Hwy, will I be able to download to it from the Configuration PC (170.166.99.200).
Thanks!
A 17 slot control logix rack with 2 - 1756-ENBT modules.
One ENBT module(information hwy)(I/P=170.166.99.100) communicates with a PC running Wonderware, PC running RSL5000 along with the mill's main ethernet network.
The other ENBT module (control hwy) (I/P=10.10.10.10) communicates with a couple of FlexLogix remote racks via a 1794-AENT module (I/P=10.10.10.11 & 10.10.10.12 & 10.10.10.13).
Note: All subnets are 255.255.255.0
When I run RSLinx, I expand the following tree:
-Workstation(170.166.99.200)
----AB_ETH-1,Ethernet
--------1756-ENBT(170.166.99.100) (1st ENBT module)
------------ControlLogix BackPlane
---------------1756-ENBT(10.10.10.10) (2nd ENBT module)
-------------------AB_ETH-1,Ethernet
-----------------------????
Question #1:
I was expecting to view the 10.10.10.xx flex AENT modules where the ???? are above. Why can't I see them?
Question #2:
I'm going to add a PanelView 600(ethernet) to this system. My question is should I add the PanelView 600 to the Info Hwy and give it a "real" IP Addr or the Control Hwy and give it a 10.10.10.xx IP Addr. If I add it to the Conrtrol Hwy, will I be able to download to it from the Configuration PC (170.166.99.200).
Thanks!