Is it age - or is it me

30 here, and I'll throw my hat in the "depends on the task" ring. If I'm writing a code from scratch I can go for hours. The creation process is thoroughly enjoyable to me. It's almost a dopamine rush when you figure out a creative and efficient way to perform a task.

On the other hand, troubleshooting or editing someone else's code is definitely less enjoyable. The "ah ha!" moments are nice, but usually I end up just re-writing large chunks to do what I want in a way I consider more straight forward. The way I see it, if I can't come in and watch the machine and understand the process after a few hours, you didn't write the code very well and it needs to be re-done anyway.
 
36 - In the 'open office' environment i'm lucky to get a solid 30mins to myself w/out losing focus.
Out on the production floor, hiding behind a machine, 3-4 hours.
At 2am when I can't sleep, 6+.
 

Similar Topics

Hello Everyone Im Trying to Study a PLC programm of a Pet Blower machine, it is programmed in Simatic Manager Step 7 in STL/AWL Lenguage in a part...
Replies
4
Views
106
Hello, I am a plc engineer and I have a job to do in the NIGERIA 25000 TON GRAIN SILOS STORAGE CONTROL PANEL. A problem where the panel is not...
Replies
1
Views
157
Hi All, I'm just trying to understand the reason behind something I recently experienced. Background: The system contains 4 CompactLogix...
Replies
2
Views
170
Developed a FactoryTalk SE program in English (Canada), finally setup the alarms and the message is reading "Message not defined for language...
Replies
1
Views
68
hi everyone, i have problem regarding Audit in FTV ver 12,In audit message "service disruption:<HMI server name>:<SERVICE NAME>" message logged,i...
Replies
1
Views
64
Back
Top Bottom