I am trying to communicate with Omron PLC CP1E-N40DR-A over USB-to-RS232 cable, using a Java program. Following is my basic code—
This code produces no effect on the DM area. In this code I am trying write “0070” at location “0620”. The connector and its driver are alright because CX-Programmer is working fine using the same cable.
Any pointers for this would certainly help me.
Thanks
This code produces no effect on the DM area. In this code I am trying write “0070” at location “0620”. The connector and its driver are alright because CX-Programmer is working fine using the same cable.
Any pointers for this would certainly help me.
Thanks