Hello,
I got E62 on Kinetix6000 servo drive.
I have checked feedback cable end to end all are good connection.
There are 9 wires connected.
In this case, how we could tell that encoder bad or something else.
Also how to fix the problem.
Thank you,
Benyamin
I got E62 on Kinetix6000 servo drive.
I have checked feedback cable end to end all are good connection.
There are 9 wires connected.
In this case, how we could tell that encoder bad or something else.
Also how to fix the problem.
Thank you,
Benyamin