robw53
Member
i have changed an L31 vs 13 for an L32E vs 19 and when i use RSLinx i cannot see the backplane or any modules conneted to the processor, it does show me a 1756 module (i think that the number) but nothing else, this is the same if i use ethernet or serial connection. the processor has worked before as it was taken from an existing project, and i can get online and the machine is running without any problems, devicenet etc still communicating with the VSD's and Flex I/O
does anyone have any ideas what i could have done wrong?
does anyone have any ideas what i could have done wrong?