cdaugherty0031
Member
Hi,
Been following the site for a while, but this is my first thread. I've run into a problem trying to connect a SLC 5/03 and Linx 5900 Inkjet coder. What I want to do is have the inkjet select a message based on a selector switch position. Pretty simple, but I cant seem to get it to work. I'm using an AWA instruction with the command in ST9:0 and sending through the serial port to the printer. I can achieve what I want to do with a Windows utility for the printer, but I don't have much experience with ASCII and am having a hard time getting this to work. I have attached the program for you all and the AWA instruction is at the bottom of LAD 13. Any help would be greatly appreciated.
Been following the site for a while, but this is my first thread. I've run into a problem trying to connect a SLC 5/03 and Linx 5900 Inkjet coder. What I want to do is have the inkjet select a message based on a selector switch position. Pretty simple, but I cant seem to get it to work. I'm using an AWA instruction with the command in ST9:0 and sending through the serial port to the printer. I can achieve what I want to do with a Windows utility for the printer, but I don't have much experience with ASCII and am having a hard time getting this to work. I have attached the program for you all and the AWA instruction is at the bottom of LAD 13. Any help would be greatly appreciated.