Dear All,
I have to control the pressure of a liquid with a Yaskawa V1000 inverter. The inverter is connected with Profibus to a 317-2-DP CPU. The inverter's frequency reference is a Word (2 Bytes).
If I set "5000 decimal" in that register, then the motor runs on 50.00Hz (there is no negative value in the register).
The pressure sensor's measuring range is "0...600bar", and it has a 4-20mA output.
I have to set the pressure of the liquid in 0.1bar unit.
I think I should use FB41 (CONT_C), but I dont know how exactly.
Please help me. Thank you in advance.
I have to control the pressure of a liquid with a Yaskawa V1000 inverter. The inverter is connected with Profibus to a 317-2-DP CPU. The inverter's frequency reference is a Word (2 Bytes).
If I set "5000 decimal" in that register, then the motor runs on 50.00Hz (there is no negative value in the register).
The pressure sensor's measuring range is "0...600bar", and it has a 4-20mA output.
I have to set the pressure of the liquid in 0.1bar unit.
I think I should use FB41 (CONT_C), but I dont know how exactly.
Please help me. Thank you in advance.