Logix Designer showing Edits Present but shows no edit zones on search.

[HazMatt]

Searching edit zones within all routines and other criteria still says no results found, yet I still have the "edits present" indicator at the top. Anyone run into this before?

 

[I_Automation]

Do you have the full offline program?

It is possible the OEM could have protected routines they don't send out and one of those has a edit in it.

 

[jholm90]

It says project changed by another user, ismore than one terminal online making changes?

 

[I_Automation]

Yes, I have tested that myself when online with 2 different computers.

If another user is making edits that aren't part of the upload or offline file you have then you will get kicked offline.

Is there another programmer on your site? Or the PLC connected to the internet?

 

[Jeev]

Your search is restricted to Ladder. You may want to check other types of routine (If possible).

 

[HazMatt]

Thanks for the replies guys. To give some background, I am converting a PLC 5 program to a control logix one. I am offline. I am actually consolidating a currently running PLC 5 into a currently running Control Logix. I had this same issue when I installed the last PLC. It was a fresh program that I made and was testing, but I still could not find edit zones (they were there but the Find function was not working. I had to scroll through to find them).

 

[HazMatt]

Your search is restricted to Ladder. You may want to check other types of routine (If possible).
View attachment 68166

There are only Ladder routines in this particular program. Also, I don't show all of those options I see in your picture.