After having used V32 for several months, I have found a few other items that are very frustrating for long-time users of RSLogix5000/Studio5000:
1) You can no longer drag tag names across tabs - In older versions you could drag a tag name down to the bottom of the screen onto the tab of another open ladder, and the screen would revert into that ladder, and allow you to continue dragging to place the tag anywhere in that ladder.
2) EVERYTHING opens a new tab - It used to be that as you opened tabs, STs, etc, that each new routine would open a new tab. Cross References, and Tag Monitoring Sessions were not included. Once the number of tabs got to be cumbersome, a simple <CTRL><F4> would close all open routines, or all open cross references, etc. Now, there is no way to mass-close anything, and EVERYTHING opens a new tab. The best I could figure out was to right click on one of the tabs and select "Close all but this"
V32 is very nice for ST though... Unfortunately, very few of my customers are ready for ST...