Lower application layer communication protocol for plc5/40e

kashifidrees

Member
Join Date
Jan 2010
Location
Sadiqabad
Posts
5
Is there any module like devicenet scanner 1771 sdn which can be installed in i/o rack and a netowrk can be created below that layer ???


Actually i want to communicate with some other protocol like modbus or dnp 3.0 etc ....
An early response is highly appreciated !!
 

Similar Topics

Hello, Does anyone have an alternative idea to correlate the speed of a VFD on an aeration blower to a desired Dissolved Oxygen setpoint...
Replies
10
Views
4,423
Customer want to use contactor for their 5HP motor blower application. im leaning to VFD. anyone use contractor for blower application...
Replies
12
Views
363
I'm a beginner in the automation field and I've set up an automation system connecting several devices (datalogger, radio, etc.) via Modbus RS485...
Replies
5
Views
229
I've got 6 identical regenerative vacuum blowers powered by 6 identical drives in 3 identical panels all fed from the same 1 main building feed...
Replies
27
Views
908
Good Evening , I have an " Oddball " Blower Motor , and really do not have any U.S. support . It is a manufacture called EBM Papst and the...
Replies
4
Views
1,158
Back
Top Bottom