M340 64 bit floating point support

atomtm

Member
A
Join Date
Jun 2014
Location
Germany
Posts
130
Do the M340 processors support 64 bit floating point numbers?
I have read a post here on the forum that states that it doesn't . Is it true? Is there a reference on Schneider's manuals for what types of variables the cpu's support ?

Thank you !
 

Similar Topics

S
M340 System bit clock not working
Hello everyone one. I'm using M340 with simulation mode (actually I still don't have the cpu to test the software). I've made a simple counter...
Replies
4
Views
504
suppaman
S
D
Help with TCSEGDB23F24FA M340 Modbus Plus Proxy Module
Hi Everyone, i was hoping for a little help with this module. i have data that needs to be read from a different plc through the Modbus plus...
Replies
11
Views
262
davexr
D
S
NTP for Schneider M580/M340
Hello all, I am wanting to update the system clock via NTP in the M580/M340. I'm aware that we are able to connect to a NTP in the controller...
Replies
4
Views
154
S.Woollett
S
E
Modbus serial data from multiple devices to M340 controller
I have 9 field devices, three METSEPM5110 power meters and six ACE949-2 rs285 interface modules. I want to read this Modbus rtu data through rs485...
Replies
8
Views
321
Enggshab
E
R
M340 as modbus master
I'm using M340 (Schneider Electric) as modbus master. It works fine but if there is a disconnection with the slave, it stops working even after...
Replies
2
Views
432
Corsair
C
Back
Top Bottom