m340 web designer

rdredge

Member
R
Join Date
Oct 2009
Location
oswaka
Posts
17
I am reading data from a local network via the m340 processors, on board Ethernet port using Modbus TCP/IP.

I now need to structure the data so that I can read it via a DNP3 link. I need to move to the webdesigner software to configure the data tables for the dnp3 network.

Is it possible to configure a DNP3 data table without using the web designer, simply in unity?
 

Similar Topics

R
Modicon M340 Web services
Hey, anybody used M340 web services in programming, i need to consume the same through c# .net for my application, please guide me how to get...
Replies
0
Views
1,651
rohitigupta
R
D
Help with TCSEGDB23F24FA M340 Modbus Plus Proxy Module
Hi Everyone, i was hoping for a little help with this module. i have data that needs to be read from a different plc through the Modbus plus...
Replies
11
Views
270
davexr
D
S
NTP for Schneider M580/M340
Hello all, I am wanting to update the system clock via NTP in the M580/M340. I'm aware that we are able to connect to a NTP in the controller...
Replies
4
Views
159
S.Woollett
S
E
Modbus serial data from multiple devices to M340 controller
I have 9 field devices, three METSEPM5110 power meters and six ACE949-2 rs285 interface modules. I want to read this Modbus rtu data through rs485...
Replies
8
Views
325
Enggshab
E
R
M340 as modbus master
I'm using M340 (Schneider Electric) as modbus master. It works fine but if there is a disconnection with the slave, it stops working even after...
Replies
2
Views
442
Corsair
C
Back
Top Bottom