irondesk40
Member
Back looking at how to use a maples and a micrologix 1400 plc and create and use recipes. Was looking into this a few months ago but have been working in Dominican Republic and El Salvador and this got put on the back burner.
Would really appreciate any advice from anyone who has ever done this and would be willing to share. I have looked at it but is just not making any sense. I have a Maples HMI5043L unit that i experiment with at the bench.
Any sample programs, or basically anything would be helpful. I have read the tech notes on Maples site but is just not sinking in.
Thanks
Would really appreciate any advice from anyone who has ever done this and would be willing to share. I have looked at it but is just not making any sense. I have a Maples HMI5043L unit that i experiment with at the bench.
Any sample programs, or basically anything would be helpful. I have read the tech notes on Maples site but is just not sinking in.
Thanks