melsec F2-20P plug in programmer

70w_SON

Guest
7
I have just started learning to program, the college I attend use siemens. However I have aquired an old mitsubishi F1-20MR PLC and a plug in programmer (melsec F2-20P), my problem is that I have no litterature to accompany the programmer. Can anyone suggest where to start looking on the net, bearing in mind that I have already tried Mitsubishi.
 

Similar Topics

P
mitsubishi melsec f1-20p
Hi, i have a mitsubishi melsec f1-20p porgramer and a mitsubishi melsec f1-20mr plc and I'm wondering if anyone knows how to program a 8ch chase...
Replies
7
Views
6,167
phillip-marks
P
D
Melsec FX-20P-E programming tool
Dear Colleagues, I would like to get user manual for melsec FX-20P-E programming tool, please. Thanks
Replies
1
Views
3,008
tragically1969
T
C
Mitsubishi Melsec F-20p-E
I have a F-12R with the little panel that fits on top to program it. Have worked out most simple programming but cannot set the value to a timer...
Replies
2
Views
3,651
coppice
C
T
Melsec F1-20P-E & F2-40M pgm readout ?
I've got a F1-20P-E hand held programmer attached to a F2-40M PLC and need to read out the program so when this unit goes belly up I can replace...
Replies
3
Views
3,750
theDave2
T
R
Issue with mitsubushi melsec PLC modbus QJ71MT91
I want to communicate my Q series PLC with Factory IO using GX works 2 software, I want to use modbus as server and the ips are as follows plc...
Replies
0
Views
103
raheelredben
R
Back
Top Bottom